GE AJCH 08 ACB, AJCH 10 ACB, AJCH 10 DCB, AJCH 12 DCB, AJOQ 06 LCB, AJOQ 08 ACB, AJOQ 10 ACB, AJOQ 10 DCB, AJOQ 12 DCB, AJGS 06 LGB, AJGS 08 ACB, AJGS 10 ACB, AJGS 09 DCB, AJGS 10 DCB, AJGS 12 DCB, AJEH 12 DCB, AJES 06 LSB, AJES 08 ASB, AJES 09 DGB, AJES 10 Air Conditioner User Manual


  Open as PDF
of 76
 
REMOVE THREE SHIPPING PADS
INSIDE AIR CONDITIONER NEXT TO
COMPRESSOR
Installation Instructions
REMOVE LOCKING PLATE ON
FRONT LEFT SIDE
1
REINSTALL LOCKING PLATE WITH
TAB BEHIND WALL CASE FLANGE.
TIGHTEN SCREW
Locking
plate
Remove
screw
INSTALLING A J-MODEL IN AN EXISTING WALL CASE
Read these instructions completely and carefully.
Remove
shipping
pads
CAREFULLY SLIDE AIR
CONDITIONER BACK INTO CASE
Make sure that the tubing on the unit does
not touch the wall case and that the case
installation is secure.
2
3
14
WHEN WALL OUTLET IS TO LEFT,
EXTEND CORD UNDER UNIT AND
HOLD IT IN PLACE WITH CLAMP
Power
cord
Clamp
ATTACH FRONT GRILLE
An opening for the power cord is on the
bottom of the front grille.
6
ATTACH POWER CORD TO BASE
PAN WITH CLAMP
Clamp
Power
cord
Base pan
4
5
7
 previous next