Filter
Top Products
14
Consumer Support Troubleshooting Tips
Operating Instructions Safety InstructionsInstallation Instructions
Install the Air Conditioner in the Case
Slide the air conditioner into the case.
Reinstall the 2 screws removed earlier on
each side of the case.
Place the bottom inner case gasket between
the bottom of the air conditioner and the
inside bottom of the case. Fold up the ends
on both sides and push them in.
Attach the front grille to the case by inserting
the tabs on the grille into the slots on the
front of the case. Push the grille in until it
snaps into place.
Secure the front grille to the case by replacing
the screw removed in Step 3A. If a screw was
not removed in Step 3A, secure the grille with
a Type D screw for models with a raise-up inlet
grille, or 1 or 2 Type D screw(s) for models
with a slide-out filter.
The installation is now complete.
D
C
B
A
Guide the lever carefully
through the grille as you
push it in.
Bottom inner
case gasket
Window Installation Instructions.
9
Front of air
conditioner.
Install the Security Bracket and the Foam Top Window Gasket
Attach the security bracket with a type B screw. Cut the foam top window gasket to the
window width.
Stuff the foam between the glass and the
window to prevent air and insects from
getting into the room.
C
BA
8