Filter
Top Products
Install the Air Conditioner in the Window
Slide the air conditioner onto the support
platform. Be sure the side channels butts
against the vertical window jamb and the
filler panel frame is against the top window
jamb. Slide the inner window sash firmly
against the side of the air conditioner and
trim any excess from the foam gasket.
Screw 2 Type B screws through the two holes
in the middle of the bottom bar. Depending
on the window configuration, this may
require drilling two 1/8″ holes in the
window channel to align with the existing
holes in the bottom bar.
Drill 1/8″ holes to align with the existing
holes in the frame. Secure with 2 Type C
screws.
NOTE: Check all seals and plug any remaining air
gaps with a suitable weatherproof caulk.
C
BA
8
Consumer Support Troubleshooting Tips Installation Instructions Care and Cleaning Operating Instructions Safety Instructions
Horizontal sliding window installation instructions.
Read completely, then follow step-by-step.
If the air conditioner does not fit securely, remove it
and readjust the leveling bolt.
Slide
window
closed
Make sure the air conditioner is firmly anchored to the
window channel frame.
Window channel frame
Type C screw
Type B screws
Secure the Window and Install the Window Side Gasket
Attach the window locking bracket with a
Type C screw.
On sliding window installations, cut the
second long foam gasket to the proper
length and stuff it between the 2 windows.
B
A
9
Window
side
gasket
Window
locking
bracket
12
Bottom bar
Type C screw