Filter
Top Products
Window Installation Instructions
Install Two Support Brackets
Mark the centerline of the sill. Measure and
mark the locations for the support brackets
8″ from both sides of the centerline.
Place two support brackets on the sill, against
the back edge of the stool with their holes
centered on each 8″ mark.
Attach them to the sill with 1 Type B screw
through each support bracket.
C
B
A
4
12
Install the Air Conditioner in the Window
Center the air conditioner in the window with
the bottom mounting rail between the window
stool and the support brackets.
Close the window. Make sure the window sash
is behind the top mounting rail of the air
conditioner. It should be level or slightly tilted
to the outside. Use a level; about 1/3 bubble
will be the correct case slant to the outside.
Extend the sliding panels to fill the window
opening and use 4 Type A screws to secure
them, 2 on each side.
C
BA
5
Type A
screws
Type A
screws
Outside
Support brackets
1/3 bubble
Window
Top mounting rail
Bottom
mounting rail
Consumer Support
Troubleshooting Tips Operating Instructions Safety InstructionsInstallation Instructions
Stool
Type B screw
Outside
Inside
Support
bracket
Sill
Type B screw
Support
bracket