Filter
Top Products
The 99.97% True HEPA Filter needs to be replaced
every 12 months. The filter may need to be replaced
more often, depending upon usage and the
environment.
99.97% True HEPA Filters can be purchased
at the retail store where you purchased your
air purifier or by calling GE Parts and Accessories
at 1.800.626.2002. The filter part number is RAPHF3.
To access:
Pull the bottom of the front cover toward you
and lift up slightly to remove.
Pull forward on the black Pre-Filter, using the pull
tabs in the middle, and remove it from the unit.
Pull the 99.97% True HEPA Filter forward
(using the “FRONT” tag) to remove it from
the unit.
Place the new 99.97% True HEPA Filter
into the unit. There is a fixed gasket on the edges
of the filter. That side goes toward the back
of the unit. There is a tab on the front side
of the filter that says “FRONT.”
Replace the Pre-Filter and front cover. These
filters and cover are not dishwasher-safe.
True HEPA Filter
10
Care and cleaning of the air purifier.
Consumer Support Troubleshooting Tips
Operating Instructions
Safety InstructionsTroubleshooting Tips
Care and Cleaning
Safety Instructions
Operating Instructions
Pull tabs