Filter
Top Products
6
About the controls on the air conditioner—models with control knobs.
Features and appearance will vary.
Controls
The air conditioner controls are located behind the
control panel door. Press to open and close the door.
Mode Control
High Cool, Med Cool
and
Low Cool
provide cooling with different fan speeds.
Fan settings provide air circulation and
filtering without cooling.
NOTE: If you move the mode control from a cool
setting to OFF or to a fan setting, wait at least
3 minutes before switching back to a cool setting.
Cooling Descriptions
For Normal Cooling
—Select
High Cool
or
Med Cool
with the TEMPERATURE control at midpoint.
For Maximum Cooling
—Select
High Cool
with the
TEMPERATURE control at the highest number
available on your knob.
For Quieter & Nighttime Cooling
—Select
Low Cool
with the TEMPERATURE control at midpoint.
TEMP Control
The TEMP control is used to maintain the
room temperature. The compressor will cycle
on and off to keep the room at the same level
of comfort. When you turn the knob to a
higher number, the indoor air will become
cooler. Turn the knob to a lower number and
the indoor air will become warmer.
CIRCULAIRE
For continuous side-to-side air circulation,
set the Circulaire switch to
ON
.
For fixed side-to-side air direction, set the
Circulaire switch to
ON
until the desired air
direction is obtained, then move it to
OFF
.
MODE CONTROL TEMPERATURE CONTROL
MODE
Low
Cool
High
Cool
OFF
High
Fan
Low
Fan
Med
Cool
7
Coolest
6
5
4
3
2
1
TEMP
Safety Instructions
Operating
Instructions
Care and Cleaning
Installation
Instructions
Troubleshooting
Tips
Consumer Support