Filter
Top Products
Window Installation Instructions
INSTALL THE AIR CONDITIONER
IN THE CASE (CONT.)
Attach the front grille to the case by
inserting the tabs on the grille into the
slots on the front top of the case. Push
the grille in.
Secure the front grille to the case by
replacing the 2 screws removed earlier.
Press on the top of the grille to help
with side screw installation.
Replace the two control knobs.
Connect power.
9
INSTALL THE AIR CONDITIONER
IN THE CASE
Slide the air conditioner into the case by
the base pan. Do not push on the controls,
styrofoam air discharge housing or the
finned coils. Make sure the air conditioner
is firmly seated.
Replace the 2 screws removed earlier,
one on each side of the case.
Reattach the ground wire to the unit
using the ground wire screw.
9
A
G
F
Do not press on
these areas—
damage to the
unit may result
Base Pan
11
B
C
E
D
Ground
wire
Ground
screw