GE ABP10 Air Conditioner User Manual


 
13
If Something Goes Wrong
Before You Call for Service
Air Conditioner
Doesn’t Start
Air Conditioner Does
Not Cool as it Should
The air conditioner Make sure the air conditioner plug is
is unplugged pushed completely into the outlet.
The fuse is blown/circuit Check the house fuse/circuit breaker
breaker is tripped box and replace fuse or reset the
breaker.
Power failure
If power failure occurs, turn the mode
control to
OFF
. When power is restored,
wait 3 minutes to restart the air conditioner
to prevent tripping of the compressor
overload.
Problem Possible Causes What to Do
Air Conditioner
Freezing Up
Ice blocks the air flow Set the mode control at
FAN ONLY
or
HIGH
and stops the air conditioner
COOL
with the temp at 1 or 2.
from cooling the room
Airflow is restricted
Make sure there are no curtains, blinds
or furniture blocking the front of the
air conditioner.
The temp control may Turn the knob to a higher number.
not be set high enough The highest setting provides maximum
cooling.
The air filter is dirty Clean the filter at least every 30 days.
See the Care and Cleaning section.
The room may have been hot When the air conditioner is first turned on
you need to allow time for the room to
cool down.
Cold air is escaping Check for open furnace floor registers and
cold air returns.
Set the vent in the closed position.
Cooling coils have iced up See freezing up below.