Filter
Top Products
Installation Instructions
Read completely then follow step-by-step
10
1
Insert the right and left hand
filler panels into the top and
bottom rails.
2
Secure them with eight 3/8″
screws, four on each side.
Install the
Filler Panels
1
Screw the leveling bolt into the
support bracket.
2
Mark the centerline of the
window and place the support
bracket on it 1
3
/
16
″ from the
window stool.
3
Attach the support bracket
onto the window sill with two
1″ screws.
4
Peel the backing off the bottom
window gasket and place onto
the backside of the window stool.
5
Using the level, adjust the level-
ing bolt so the curved top of the
support bracket is 1⁄4″ below the
top of the window stool.
NOTE:
This downward tilt towards the
outside prevents water from entering
the room.
Install the
Support Bracket
Support
bracket
1/4″
Level with sill
Stool
1
3
/
16
″