Filter
Top Products
Programming Options 10
Option 7: Downloader Phone Number
Range = 26 Digits (Default = Off)
Lets you program up to a 26-digit phone number for a computer modem for
using GE Interlogix CareGard Configurator/Programmer, or delete an exist-
ing phone number (off).
Use the Add button to enter a * symbol. Use the Delete button to enter a #
symbol. Use the Test button to enter a pause.
¾
To program a Downloader Phone Num-
ber:
1. Press Add.
2. Press Option #.
3. Press 0, then 7.
4. Enter the Number using the numbered but-
tons.
5. Press Done.
Option 8: Phone Lock
Range = On/Off (Default = Off)
Prevents resetting of phone/reporting related to Options 3, 4, 6-11 and Util-
ity Access Code 1 when a memory clear is performed (on), or resets all
options to their default values when a memory clear is performed (off).
¾
To Add or Delete Phone Lock:
1. Press Add or Delete.
2. Press Option #.
3. Press 0, then 8.
4. Press Done.
Option 9: Downloader Code
Range = 00000-99999 (Default = 12345)
Lets you set a unique 5-digit code that is required for initiating CareGard
Remote Programmer sessions or sets the code to its default (off).
The code must be 5 digits long and can range from 00000 to 99999. The
Downloader Code must match the downloader access code in the CareGard
Remote Programmer account to perform downloader sessions.
Note
The Downloader Code should always be changed from the default setting to
avoid competitor theft.
¾ To program a Downloader Code:
1. Press Add.
2. Press Option #.
3. Press 0, then 9.
4. Enter a Downloader Code using the num-
bered buttons.
5. Press Done.
Option 10: Phone Mod 1
Range = 0-3 (Default = 0)
Determines what (content) and how (format) the panel should report through
the primary phone number (Option 3), if one is programmed. Table 2
describes the available settings for Phone Mod 1.
Note
Phone Mod 1 must be set to 0 or 1 for ETL (UL 1635) listed systems.
¾ To program Phone Mod 1:
1. Press Add.
2. Press Option #.
3. Press 1, then 0.
4. Enter a Phone Mod 1 using the numbered
buttons.
5. Press Done.
Table 2: Phone Mod 1 Settings
Setting Content Format
0All SIA
1 All Contact ID
2 Alarms Only SIA
3 Alarms Only Contact ID