Filter
Top Products
18
19
RAK1082 Whirlpool Sleeve Adapter
Kit adapts Whirlpool Type 23W wall case for installation of the
sloped front or rounded front “J” model chassis. The Whirlpool
case dimensions are 25-7/8" W, 16-1/2" H, 23-1/8" D.
RAK1102/RAB30 (F Model Sleeve) Adapter
Kit adapts RAB30 wall case for installation of the sloped front or
rounded front “J” model chassis. The RAB30 case dimensions
are 26" W, 18" H, 24" D.
Built-in units
RAK123A64 Fedders Sleeve Adapter
Kit adapts Fedders “A” wall case for installation of the “J” wall
case (includes outdoor grille) and “J” model chassis. Existing
Fedders wall case dimensions are 27" W, 16-3/4" H, 16-3/4" D.
Kit consists of four gaskets which are applied to the wall case
to assure a tight weather seal between the two cases.
RAK1072 Hotpoint Chassis Sleeve Adapter
Kit adapts Hotpoint ACXB 10 and ACXB 11 wall case (used with
ACTB chassis) to the sloped front or rounded front “J” chassis.
Existing case dimensions are 25-3/4" W, 16-7/8" H, 18-5/8" D.
All needed gaskets and hardware, including the outdoor grille,
are included.
Built-in units
RAA72 Replacement Filter
for Rounded Front “J” Chassis
• Replacement filter for use in Room Fronts with
2 Round Control Knob openings ONLY.
• Washable/reusable nylon mesh filter.
• Order individually or by box of 20.
• Used for Standard or High Mount models.
RAA72A Replacement Filter
for Rounded Front “J” Chassis
• Replacement filter for use in Room Fronts with Oval Control
Knob openings ONLY.
• Washable/reusable nylon mesh filter.
• Order individually or by box of 20.
• Used for Standard or High Mount models.