Filter
Top Products
24 Keypad — Buttons
Rev A
Keypad — Buttons
1. DOWN arrow. Generally used to scroll down or increment through a
group of choices.
2. SET. Used to accept a setting that normally becomes stored in
memory. Also used together with the arrow buttons.
3. UP arrow. Generally used to scroll up or increment through a group of
choices.
4. Regen. Used to command the controller to regenerate.
Programming Conventions
The Ultramax controller is programmed using the buttons on the keypad.
The programming instructions will be described two ways whenever a
section has keypad input.
First, a table shows simplified instructions. Second, text follows that
describes the action. In each table:
"Action" lists the event or action desired.
"Keys" are listed as:
UP for up arrow
DOWN for down arrow
SET for set
REGEN for regeneration
"Duration" describes how long a button is held down:
P/R for press and release
HOLD for press and hold
X sec for a number of seconds to press the button and hold it down
"Display" calls out the display icons that are visible.
21
3
4