15
5.12 Place five small coals along the rear of the flame baffle,
resting against the rear ledge, see diagram 15.
5.13
Ensure that the fibreglass seal on the back of the door is intact,
locate the door on the four studs and slide back to the firebox.
Secure in place using the four brass nuts and the tool
supplied, do not over tighten the nuts, see diagram 16. Keep
the tool with these instructions for future use.
NEVER OPERATE THE STOVE WHEN THE DOOR IS
REMOVED OR WHEN THE GLASS IS BROKEN.
Go to page 17, COMMISSIONING.
5.14 Place the flame baffle onto the shelf at the rear of the tray
and push up against the rear ledge, see diagram 17.
5.15 Locate the front coal moulding in front of the flame baffle
ensuring that the end legs sit flat against the burner skin, see
diagram 18.
5.16 Place three large coals on the front coal so that they lean
against the flame baffle and four large coals on the flame
baffle so that they sit on the fingers, see diagram 19.
INSTALLATION INSTRUCTIONS
INSTALLATION
15
14
16
AR0368
AR0390
AR0369
Large Claendon
17
AR0370
18
AR0371
19
AR0372