27
•Refitthedoor
•Closetoapplypressureonthenewrope
•Leavetheapplianceclosedforatleast12hoursbefore
lighting the stove
•Useatalowoutputforapproximatelyoneday
7.3 Using the stove with a damaged door seal could allow
dangerous fumes to enter the room, or the appliance to
over-fire and cause damage.
8. ADJUSTING DOOR HINGES
8.1 To maintain the safe use of your appliance, you may need
to adjust the door hinges to ensure the door closes safely
and correctly.
8.2 To complete this operation:
•Openthedoortogiveaccesstothefixedpartofthedoor
hinge as shown
Fixing Nut Lock Nut
PR7087
PR7086
•Usea19mmA/Fspannertoloosenthefixingnuts
•Repositionthehingeblockstoachieveacorrectfit
This may require several adjustments to find the correct
position.
•Tightenthescrewsevenlyuntiltheclipsholdtheglass
Do not over tighten the clips as this could break the glass.
6.3 Fit only Stovax ceramic glass, which is suitable to use in
high temperature applications.
6.4 Using the appliance with damaged door glass could allow
dangerous fumes to enter the room, or the appliance to
over-fire and cause damage.
7. FITTING A NEW DOOR SEAL
7.1 To maintain the safe use of your appliance you may need to
replace a damaged or worn door sealing rope.
7.2 To complete this operation:
•Openthedoor
•Liftitfreeofthehingeblocks
•Liethedoorfacedownonasoftflatsurface,toprotect
the paintwork and glass
Joint
Seal 14mm
Seal 14mm
Seal 10mm x 2mm
PR7084
PR7085
Single Door
Double Door
•Removetheoldrope
•Scrapeoldgluefromthelocatinggroove
•Cleanthelocatinggroovewithacleandryclothremoving
all dust and debris
•ApplyStovaxThermicSealglue(StovaxPartNo.5037)
into the rope locating groove
•PressthenewStovaxropeintothelocatinggroove,
placing the joint in the middle of the lower edge of the
door
MAINTENANCE and SERVICING