23
INSTALLATION INSTRUCTIONS
•Placethemaingrateintoplaceonthesteelrunners
The grate must sit flat and locate in the fixing slots in the
supports.
•Refitthefirebricksabovethegrate
•Removetheoperatingknobandnutfromtheendofthe
rod
•Fittheoperatingrodtothecentregrate
•Feedtheoperatingrodthroughtheholeinthefrontof
the firebox, while dropping the centre grate into position in
the main grate
•Refittheoperatingknobandlockintopositionwiththe
nut
•Refitthelogretainer
•Placetheashpanunderthegrate.
•Fittheadditionaldoorsealtothebackofthedooras
detailed
•Removetheaircontrolcoverfixingbolts
Note how the air slider is assembled for ease of
replacement
•Fixtheadditionalsealtothebackofthedoor
Use the new, longer, fixing bolts to replace the air control
cover. The seal should line-up with the front of the main
grate.
•Checkthatthedoorclosescorrectly.
5B. FITTING MULTI-FUEL KIT TO STOVE
(OPTIONAL) STOCKTON 8 SLIMLINE
Stockton 8 Slimline only
L/H Side Casting
R/H Side Casting
Main Grate
Door Seal (x2)
Ashpan
Ashpan Tool
PR7500
5.1 These instructions cover the fitting of the optional multi-
fuel kit to a wood burning appliance, in order to burn
manufactured smokeless fuels as listed in the User
Instructions.
5.2 To fit the Multi-fuel kit:
•Fitsidefirebricks,asdetailedinsection3
•SlidetheL/HandR/Hsidecastingsintopositionagainst
the side bricks
•Placethemaingrateontothesidecastings
Ensure the 2 small corner cut-outs are at the front.
•Refitthelogretainer
•Placetheashpanunderthegrate
•Fittheadditionalsealstothebackofeachdoor
Use the one long fixing bolt (new) and one existing fixing
bolt. Note how the cover and air control are fitted to enable
reassembly.
•Passtheadditionalsealunderthefrontedgeofthemain
grate
Adjust to ensure the correct fit.
•Checkthatthedoorclosescorrectly