Stovax 7051 Stove User Manual


  Open as PDF
of 30
 
20
INSTALLATION INSTRUCTIONS
The Flue must be installed in accordance with
manufacturers instructions.
Seal Collar with Fire Cement
Self Tapping Screw
Tee
Size Stovax Part No.
5" 4516
6" (4616)*
Cap
PR7228
PR7229
600mm min
1000mm max
unsupported
Elbow with access cover
Size Stovax Part No.
5" 4512
6"* 4612
Flue Pipe 915mm (3ft)
Size Stovax Part No.
5" 4502
6"* 4602
To chimney connection as detailed in
building regulation
2. REMOVAL OF THE LOG GUARD
2.1 To remove the Log guard:
•LiftLogGuardclearofthesupportingbrackets
•Rotatetoclearthesidesofthedooropening.
Do not use appliance without the log guard in position.
3. FITTING & REMOVAL OF FIREBRICKS
(BRUNEL 1A ONLY)
3.1 Remove the firebricks as part of the routine maintenance.
This can be carried out without the use of tools.
3.2 Allow the appliance to cool fully before removing firebricks.
PR8009
The Flue must be installed in accordance with
manufacturers instructions.
PR7230
Self tappping
screw at rear
Flue Pipe 915mm (3ft)
Size Stovax Part No.
*5" 4502
6" 4602
Seal flue collar
with Fire Cement
600mm min
1000mm max
unsupported
Elbow with access cover
Size Stovax Part No.
5" 4512
6"* 4612
Flue Pipe 915mm (3ft)
Size Stovax Part No.
5" 4502
6"* 4602
To chimney connection
as detailed in building
regulations
PR7226
1.3 Rear flue pipe installation
•Insertateeintothefluecollar
The tee piece is used as cleaning access.
•Liftapplianceintoposition
Take care not to damage the hearth finish.
•Levelusingadjustablebolts,seepicture1
•Connectteetothechimneyusingfluepipe
•Securewithselftappingscrew
•Sealtheconnectingjoints
Do not use a 90˚ elbow to make this connection
 previous next