9
7. ASH REMOVAL
7.1 All fuels:
•OpenDoors,SeeDiagram11
AR2142
•Riddle,SeeDiagram12
Riddling Mechanism
•RemoveAshpancarefully.Heatcanremainlongafteruse,
See Diagram 13
Ashpan Tool
AR2140
•Usegloves,orplacetheashintoaStovaxAshCaddy
(Stovax Part No. 4227)
•Removeashatleastonceeveryweekwhenburningwood
•Donotplacehotashinabinmadefromplasticorany
other combustible material.
USER INSTRUCTIONS
8. OVER NIGHT BURNING
8.1 It is possible to get the appliance to burn over night.
In order to do this:
•De-ashpriortofinalrefuelling
•Setaircontrolstolowcombustionsettings
This will blacken the glass over night but it will clear when
operated at high output for a short period.
•Usesmokelessfuelorsmall,thicklogsdependingonfuel
desired
9. OVER-FIRING
9.1 Do not over-fill with fuel or use at maximum output for
long periods or over-firing can occur. If the flue pipe, flue
collar or top plate glow red the appliance is over-firing:
•Close the air controls to reduce the output
9.2 Over-firing can cause permanent damage to the appliance.
10. CHIMNEY FIRE
10.1 If a chimney fire occurs:
•Shut all air controls immediately
•Evacuate the building
•Call the fire brigade
•Do not re-enter the building until it is confirmed safe
10.2 Do not use the appliance after a chimney fire until:
a) It has been inspected by a registered installer,
confirming the appliance is safe to use*
b) The chimney system inspected and swept by a chimney
sweep, confirming the system is structurally sound and free
from obstruction before re-use.**
c) It is repaired as required before re-use. Use only
genuine Stovax replacement parts to keep your appliance in
safe and efficient working order.
In the U.K:
* registered with HETAS (GB only)/INFO (Republic of
Ireland only)
**This should be done by a NACS registered (UK only)/
INFO registered (Eire only) chimney sweep, who will issue
you with a certificate.