Garmin GWS 10 Home Safety Product User Manual


  Open as PDF
of 42
 
GWS 10 installation instructions EN–5
EN
4. Choose from the following settings to adjust the lter:
Off— turn off the lter to make the display more sensitive to changes in the wind.
On—select a higher number to increase how sensitively the display reacts to changes in the wind speed, or select a lower number to
decrease the sensitivity.
Auto—automatically adjusts the lter settings based on wind conditions.
Conguring the GWS 10 if the Filter and Offset Selections Are Not Shown
Refer to your Garmin Chartplotter or marine instrument owner’s manual for instructions on accessing conguration.
To congure the orientation:
1. Select Generic Conguration to specify data for the lter and offset settings.
2. Enter the following command: “ANGLEOFFSET=”
3. Follow the command with a number between 0 and 359, in degrees.
To congure the wind angle lter:
1. Select Generic Conguration to specify data for the lter and offset settings.
2. Enter the following command: “ANGLEFILTER=”
3. Follow the command with a number between 0 and 254, representing a time constant in increments of 0.25 second, or 255 to represent the
automatic setting.
To congure the wind speed lter:
1. Select Generic Conguration to specify data for the lter and offset settings.
2. Enter the following command: “SPEEDFILTER=”
3. Follow the command with a number between 0 and 254, representing a time constant in increments of 0.25 second, or 255 to represent the
Automatic setting.
NMEA 2000 PGN Information
Use the tables to determine the approved NMEA 2000 PGN information that can be received and transmitted by a GWS 10 when
communicating with a NMEA 2000-compliant device.
Transmit Receive
059392 ISO Acknowledgment 059392 ISO Acknowledgment
060928 ISO Address Claim 059904 ISO Request
126208 NMEA - Command/Request/
Acknowledge Group Function
060928 ISO Address Claim
126464 Transmit/Receive PGN List Group
Function
126208 NMEA - Command/Request/
Acknowledge Group Function
126996 Product Information
130306 Wind Data
130312 Temperature
130314 Actual Pressure
Specications
Physical
NOTE: The width of this sensor varies with the positioning of the wind vane.
Unit Dimensions: W × H × D: 19
11
/
16
- 22
5
/
8
× 11
1
/
32
× 5
1
/
2
in. (500-575 × 280 × 140 mm)
Weight: 0.6 lb (0.275 kg)
Cable: Attached NMEA 2000 cable length: 18 in. (46 cm)
Temperature Range: 5°F - 158°F (-15°C to 70°C)
Case Material
Housing and Base PC/ABS
Wind vane and Anemometer Polypropylene
•
•
•
The GWS 10 is NMEA 2000
certied.
 previous next