Fujitsu MB95F430 Electric Heater User Manual


 
14 / 18
Induction Heater C Library User Manual Version 1.2
MCU-AN-500087-E-12
6.2. Operate Descript
Turn On/Off
When we have connect the power, the Power led will light. We can push the Power button
to turn on the device, and the Power led will start wink. At anything, we can push the
Power button to turn off the device.
Mode Change
When we turn on the device, the system is in standby. We must push the M-Inc or M-Dec
to start the system. The system has six work modes. You can push the M-Inc and M-Dec
to change the work mode.
Power Change
In normal, you can use the Inc or Dec button to change the power, and the range is from
200W to 2100W. When you change the power, the display will automatically change also.
Timer Set
At first, we push the Timer, the system will enter timer setting mode. We can push the Inc
or Dec to change the timer time. When we push the Timer again, the timer will be set and
started, and the Timer led will wink. If we want stop the timer, we must push the Clear.
Display Change
If you push the View, you will change the display information between power and time.