Filter
Top Products
En-4
OPERATION
Room temperature sensor selection
THERMO
SENSOR
Indoor unit
Press the THERMO SENSOR button to select whether the
room temperature is detected at the indoor unit (remote
sensor) or the remote controller.
When the thermo sensor display appears, the room
temperature is detected at the remote controller.
NOTES
• This function is locked at the factory. In order to detect the room temperature correctly, consult authorized service
personnel when using this function.
• If this function is locked, the location where the room temperature is detected cannot be changed and the
mark fl ashes when the THERMO SENSOR button is pushed.
Part lock function
DAY OFF
DELETE SET
SET BACK
DAY
CLOCK ADJUST
Press the DAY (DAY OFF) button and SET button
simultaneously for 2 seconds or more to activate the
part lock function and lock all of the buttons on the
remote controller except the Start/Stop button, Set
Temperature buttons, Master Control button, and Fan
Control button. Press the buttons again for 2 seconds
or more to deactivate the part lock function.
When the part lock function is activated, the
mark appears. If any button is pressed during the part
lock, the PL display fl ashes.
ON/OFF TIMER
Instructions related to heating are applicable to “HEAT & COOL MODEL” (Reverse Cycle).
To set the ON/OFF timer
1
CLOCK ADJUST
Press the TIMER MODE button
to select the ON TIMER or OFF
TIMER.
No display
NON
STOP
OFF
TIMER
ON
TIMER
WEEKLY
TIMER
To cancel the timer mode
DELETE
• Press the DELETE button to cancel the timer mode.
• The timer mode can also be canceled by changing the timer mode using the TIMER MODE
button.
SU
MO
TU
WE
TH FR
SA
ex. OFF timer set for 6 hours
2
From 1 to 24 hours
Press the SET TIME buttons to set the time.
After the time is set, the timer will start automatically.
The amount of time until the OFF timer operates that
is displayed on the timer display decreases as time
passes.
OM_9373117063-en.indd Sec1:4OM_9373117063-en.indd Sec1:4 9/10/07 5:16:10 PM9/10/07 5:16:10 PM