Filter
Top Products
En-13
AGC FUNCTION
This function keeps the video output level of
the camera by varying the gain control auto-
matically.
The AGC function switch can be turned ON/OFF
by moving #1 switch of Dip Switch right and
left.
(Factory setup is AGC ON.)
This function changes the sensitivity of the
camera by varying the electronic shutter speed
according to the amount of incident ray.
ESC range; 1 : 300
The ESC function switch can be turned ON/OFF
by moving #2 switch of Dip Switch right and
left.
(Factory setup is ESC ON.)
BACK LIGHT COMPENSATION
(BLC) FUNCTION
The Back Light Compensation function allows
fine picture correction to prevent the subject
from being extremely dark due to strong back-
light.
The BLC function switch can be turned ON/OFF
by moving #3 switch of Dip Switch right and
left.
(Factory setup is BLC OFF.)
CAUTION:
Set the AGC Switch (#1 switch of Dip Switch)
to “ON“ for BLC function, otherwise BLC
function does not work.
CAUTION:
Set the FL Switch (#8 switch of Dip Switch) to “OFF“,
otherwise ESC function does not work.
ELECTRONIC SENSITIVITY CON-
TROL (ESC) FUNCTION