Filter
Top Products
1. Under the grill, remove the NG gas regulator
assembly from the main gas pipe. Once the
NG gas regulator is removed, the main gas
pipe will be showing under grill. (See Fig 1)
2. Using pipe sealant, attach the “T” Fitting to
the main gas pipe coming out of the bottom of
the grill. (See Fig 2)
3. Using pipe sealant, attach a 3/8” flared fitting
to the side of the “T” fitting. (See Fig 3)
4. Attach the one end of the flex line to the fitting
on the side of the “T” fitting. Connect the other
end of the flex line to the side burner valve.
(See Fig 4)
Note: This line can be extended using a 3/8”
flared coupling and an additional flex line if
necessary.
5. Using pipe sealant, attach a 3/8” nipple to the
bottom of the “T” fitting. (See Fig 5)
6. Using pipe sealant, attach the NG gas regulator
to the 3/8” nipple. (See Fig 6)
7. Attach the NG gas line to the bottom flared
fitting. (See Fig 7)
Note: Make sure all fittings are tightened with
a wrench.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig.6
Fig.7
Natural Gas Installation