Frigidaire FRS123LC1 Air Conditioner User Manual


 
1. Remove the electrical control
board cover from the outdoor unit
by loosening the screw.
2. Connect the connective cables to
the terminals as identified with
their respective matched numbers
on the terminal block of indoor
and outdoor units. The connective
cable to power supply shall be
approved polychloroprene
sheathed flexible cord.
3. Secure the cable onto the control
board with the cord clamp.
4. To prevent the ingress of water,
cable as illustrated in the
installation diagram of indoor and
outdoor units.
5. Insulate unused cords (conductors)
Connect the cable to the outdoor unit
Screw
Cover
Electrical work
(Heating and cooling model)
(Heating and cooling model)
"Cable D”
"Cable F”
"Cable E”
or
form a loop of the connective
with PVC-tape. Process them so
they could not touch any electrical
or metal parts.
1.57"
0.39"
Code wire
Code wire Code wire
Code wire
1.57"
1.57"
1.57"
0.39"
0.39"
0.39"
< 12000 btu's CABLE
< 12000 btu's CABLE (Cooling model)
> 12000 btu's CABLE
22