Filter
Top Products
Fan
Faster
Fan
Faster
Fan
Slower
Fan
Slower
Temp/Timer Temp/Timer
AUTOAUTO
Fan
Faster
Fan
Faster
Fan
Slower
Fan
Slower
Temp/Timer Temp/Timer
AUTOAUTO
Fan
Faster
Fan
Faster
Fan
Slower
Fan
Slower
Temp/Timer Temp/Timer
AUTOAUTO
Fan
Faster
Fan
Faster
Fan
Slower
Fan
Slower
Temp/Timer Temp/Timer
AUTOAUTO
Fan
Faster
Fan
Faster
Fan
Slower
Fan
Slower
Temp/Timer Temp/Timer
AUTOAUTO
Fan
Faster
Fan
Faster
Fan
Slower
Fan
Slower
Temp/Timer Temp/Timer
AUTOAUTO
Air Conditioner Features
(continued)
NOTE: The following instructions represent the Control Panel, the same
instructions can be used for the Remote Control.
TO TURN UNIT ON:
YOU WILL SEE:
DO THIS:
PRESS ON/
OFF PAD
TO CHANGE TEMPERATURE
SETTING:
YOU WILL SEE:
DO THIS:
PRESS TO
RAISE
PRESS TO
LOWER
NOTE: Tap or hold either up( ) or down ( ) button until the
desired temperature is seen on the display. This temperature
will be automatically maintained anywhere between 60 F(15 )
and 90 F(32 ). If you want the display to read the actual room
temperature. See “ To Operate on Fan Only” section on Page
7.
TO ADJUST FAN SPEEDS: YOU WILL SEE:
DO THIS:
PRESS TO
SELECT:
FASTER
SLOWER
A 2 Digit Display is used to indicate the Fan Speed setting, from
10 through 99. When the “ SLOW” button is pressed, the motor
speed will slow down at multiple intervals (90 distinct settings),
to a minimum setting of 10. To speed the motor up, press the
“ FASTER” button. The speed will increase at multiple intervals
to a maximum setting of 99. After 5 seconds the control will
automatically change back to displaying the set temperature.
6