Filter
Top Products
AUTOAUTO
Auto
Cool
Auto
Cool
Clean
Air
Clean
Air
Cool
Energy Saver
Fan
Heat
ModeMode
Temp /TimerTemp /Timer
Temp /TimerTemp /Timer
Fan SlowerFan Slower
Fan FasterFan Faster
On/OffOn/Off
SleepSleep
Check
Filter
Check
Filter
Remote
Sensing
TimerTimer
Operation of Current
Device
To reduce the risk of fire, electric shock, or injury to persons, read the
IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
WARNING
!
The power supply cord contains a current device that senses damage to the power cord. To
test your power supply cord do the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button.
You will notice a click as the RESET button pops out.
3. Press the RESET button. Again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products this is
also indicated by a light on the plug head).
NOTES:
Do not use this device to turn the unit on or off.
Always make sure the RESET button is pushed in for correct operation.
The power supply cord must be replaced if it fails to reset when either the TEST button is
pushed, or it cannot be reset. A new one can be obtained from the product manufacturer.
If power supply cord is damaged, it CANNOT be repaired. It MUST be replaced by one
obtained from the product manufacturer.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel and remote as
shown below and all its functions, then follow the symbol for the functions you desire.
The unit can be controlled by the control panel alone or with the remote.
Air Conditioner
Features
TURNS UNIT
ON OR OFF
ACTIVATES
TIMER
SETS FAN
SPEEDS
CHECK FILTER
RESET BUTTON
SETS
MODE
SLEEP
MODE
Control panel
Remote with digital display &
remote sensing feature
AUTO COOL
FEATURE
ADJUSTS
TEMPERATURE
OR TIME
CLEAN AIR
FEATURE
(SOME MODELS)
REMOTE TEMP.
SENSING
INDICATOR
(SOME MODELS)