Frigidaire 309000848 Air Conditioner User Manual


 
11
Air Conditioner Features
(continued)
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar
with.
Remote control works exactly like the control panel, follow the same instructions.
The “Cool “ circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents
overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time.
The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees.
The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the other
and back, press and hold filter check and fan selector together for 3 seconds.
Fresh Air Vent Control
The Fresh Air Vent allows the air conditioner to recirculate inside air (OFF), draw
air into the room (FRESH AIR) or exhaust stale air to the outside (VENT). See Figures
1, 2 & 3 for this operation.
The “OFF” position is used when MAXIMUM cooling is desired. It may also be
for room air re-circulation without cooling when the selector switch is set to the
FAN position, this will also filter the room air.
The FRESH AIR position allows outside air to be drawn into the room to refresh
the inside room air.
The VENT position removes stale air from the room and exhausts it to the
outside.
Any vent position can be used with any fan selection.
Figure 1 (OFF)
Figure 2 (FRESH AIR)
Figure 3 (VENT)