Filter
Top Products
5
Operation of Current
Device
To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS before operating this appliance.
The power supply cord contains a current device that senses damage to the power cord. To test your
power supply cord do the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will
notice a click as the RESET button pops out.
3. Press the RESET button. Again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products this is also indi-
cated by a light on the plug head).
NOTES:
• Do not use this device to turn the unit on or off.
• Always make sure the RESET button is pushed in for correct operation.
• The power supply cord must be replaced if it fails to reset when either the TEST button is pushed, or
it cannot be reset. A new one can be obtained from the product manufacturer.
• If power supply cord is damaged, it CANNOT be repaired. It MUST be replaced by one obtained from
the product manufacturer.
Unit Description
Accessories Included
• Check all the accessories are included in the package and please refer to the
installation instructions for their usage.
Fig.2
Fig.1
EXHAUST ADAPTOR & FLEXIBLE DUCTING 1
WALL ADAPTOR (FOR PERMANENT
1
DUCT MOUNTING)
WINDOW ADAPTOR 1
WINDOW SLIDING KIT 1
WALL PLUG 4
SCREWS 4
ALKALINE BATTERIES 2
REMOTE CONTROL 1
WATER PUMP DRAIN HOSE 1
PART: PART NAME: QTY.:
REAR VIEWSIDE VIEWFRONT VIEW