Filter
Top Products
4
Operating Instructions
2009 Electrolux Home Products, Inc. All rights reserved.
Operating Instructions
(continued)
4. You can also use the FAN button to change the fan speed to HIGH or LOW. The indicator light will show the
setting you have selected. A higher fan speed will result in quicker moisture removal.
5. The FILTER RESET light will illuminate after 250 hours of operation. At this time refer to the care and cleaning
section to remove and clean the filter. Once the filter has been cleaned, to extinguish the light simply press the
FILTER button.
3. After a few days when the Relative Humidity has declined, press the HUMIDITY or buttons to choose a value
between 35% to 85%, so the room is kept at a comfortable concentration. Pressing the or buttons will
change the humidity selection in 5% increments. After you have set the desired humidity, the readout will display
the actual room humidity. If at any time you want to return to the CONTINUOUS Mode, pressing the HUMIDITY
button will lower the Relative Humidity through the 5% increments until the display reads CO.