Frigidaire 100BTU-25 Air Conditioner User Manual


 
5
Auto
Temp
LIGHT
ON/OFF
REMOTE CONTROL
ACTIVATES
TIMER
FAN
SPEED
SETS
MODE
ADJUSTS
TEMP &
TIME
Air Conditioner Features
UNIT CONTROL
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and
all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the
unit control alone or with the remote.
Battery Size: AAA
Warning: do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries.
TO TURN UNIT ON:
NOTE: The following instructions represent the Unit Controls, the same instructions can be used for the Remote Control.
DO THIS:
PRESS ON/OFF
BUTTON
YOU WILL SEE:
YOU WILL SEE:
Note: Tap or hold either up(
) or down( ) button until the desired temperature is seen on the display. This temperature will be auto-
matically
maintained anywhere between 60˚F (16˚C) and 90˚F (32˚C). If you want the display to read the actual room temperature. See
“To Operate on Fan Only” section on Page 6.
TO CHANGE
TEMPERATURE SETTING:
PRESS TO RAISE
PRESS TO LOWER
DO THIS:
AUTO TEMP
SETS
DISPLAYS
TEMPER
ATURE/TIME
FAN SPEED
ACTIVATES
TIMER
CHECK FI
LTER
RESET
BUTTON
SETS MODE
TURNS UNIT
ON OR OFF
AUTO TEMP
FE
ATURE
SLEEP MODE
SETS FAN SPEED
ADJUSTS
TEMP &
TIME