Filter
Top Products
1.4 FEATURES
• Designed for cooling only.
• Powerful and whisper cooling.
• Slide-in and slide-out chassis for the simple
installation and service.
• Side air-intake, side cooled-air discharge.
1.5 CONTROL LOCATIONS
1.5.1 CONTROL ONLY MODEL
• VENTILATION
The ventilation lever must be in the CLOSE position
in order to maintain the best cooling conditions.
When fresh air is necessary in the room, set the
ventilation lever to the OPEN position.
The damper is opened and room air is exhausted.
Before using the ventilation feature,
make a ventilation kit. First, pull down
part to horziontal line with part .
• FOR NORMAL COOLING
1. Turn the Mode switch to the High, Med or
Low Cool setting.
2. Set the Temperature control to the desired
temperature point (the mid-point is a good
starting position). If the room temperature is not
satisfactory after a reasonable time, adjust the
control to a cooler or warmer setting, as
appropriate.
• FOR MAXIMUM COOLING
1. Turn the Mode switch to the High Cool setting.
2. Set the temperature control to the highest
temperature point (all the way to the right).
• FOR QUIETER OPERATION
1. Turn the Mode switch to the Low Cool setting.
2. Set the Temperature control as needed.
• Energy Saver Switch
This rocker switch can be depressed to either YES
or NO. In the YES position, you will get the most
economical operation. Both the fan and the
compressor will cycle on and off together,
maintaining the selected temperature at a more
constant level and reducing the humidity more
efficiently. This control will only operate when the
unit is in a cooling mode. In the NO position, the
fan will run constantly as long as the unit is in the
cooling mode.
• Built in adjustable THERMOSTAT.
• Washable one-touch filter.
• Compact size.
• Reliable and efficient rotary compressor equipped.
—4—
CLOSE VENT OPEN
Part
A
Part
B
NOTE