Friedrich XQ08 Air Conditioner User Manual


 
1
Thank you for your decision to purchase the Friedrich Room Air Conditioner. Your new Friedrich has been carefully engineered
and manufactured to give you many years of dependable, efficient operation, maintaining a comfortable temperature and
humidity level. Many extra features have been built into your unit to assure quiet operation, the greatest circulation of cool, dry
air, and the most economic operation.
This Installation and Operation Manual has been designed to insure maximum satisfaction in the performance of your unit. For
years of trouble-free service, please follow the installation instructions closely. We cannot overemphasize the importance of
proper installation. We have added new information to the basic instructions to help you achieve success.
Congratulations!
General Instructions
Here are some suggestions to help you use your
new Friedrich most efficiently:
1. Carefully read and follow the installation instructions.
2. Make sure the unit is the right capacity for the area
being cooled. An undersized unit makes the unit work
too hard, using more electricity than needed and
increases wear. An oversized unit will cycle on and off
too rapidly, and therefore cannot control humidity as
well.
3. Clean the filter frequently (See Routine Maintenance).
4. Do not block the air flow to and from the unit. Make
sure the louvers are directed to give even distribution.
5. A dirty filter or improperly set controls can affect the
cooling ability of the unit.
6. If cooling is weak and you have verified that the filter is
clean and the controls are properly set, the unit may
be low on refrigerant, and you should call your
Friedrich service provider to check the unit.
7. Keep blinds, shades and drapes closed on the sunny
side of the room being cooled to reduce radiant heat.
8. Proper insulation helps your unit maintain the desired
inside temperature.
9. Whenever possible, shade south and west facing
windows.
10. Keep window coverings away from the unit to provide
free air flow.
WARNING
Please read this manual thoroughly prior to equipment
installation or operation.
It is the installer’s responsibility to properly apply and
install the equipment. Installation must be in
conformance with the NFPA 70-2008 National Electric
Code or current edition, International Mechanic Code
2009 or current edition and any other applicable local
or national codes.
Failure to do so can result in property damage,
personal injury or death.
WARNING
Refrigeration system under high pressure.
Do not puncture, heat, expose to flame or incinerate.
Only certified refrigeration technicians should service
this equipment.
R410A systems operate at higher pressures than R22
equipment. Appropriate safe service and handling
practices must be used.
Only use gauge sets designed for use with R410A. Do
not use standard R22 gauge sets.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual
and on your appliance. Always read and obey all safety messages.
This is a safety Alert symbol. This symbol alerts you
to potential hazards that can kill or hurt you and
others.
All safety messages will follow the safety alert
symbol with the word “WARNING” or “CAUTION”.
These words mean:
WARNING
Indicates a hazard which, if not
avoided, can result in severe
personal injury or death and damage
to product or other property.
CAUTION
Indicates a hazard which, if not
avoided, can result in personal injury
All safety messages will tell you what the potential hazard is, tell you
how to reduce the chance of injury, and tell you what will happen if
the instructions are not followed.
and damage to product or other property.
NOTICE
Indicates property damage can
occur if instructions are not
followed.