Filter
Top Products
Unit does not operate.
Ɣ The unit is turned to the off position,
Ɣ Turn the unit to the on position and raise or lower
temperature setting (as appropriate) to call for
operation.
Ɣ Ɣ Plug into a properly grounded 3 prong receptacle.
proper receptacle type for your unit.
Ɣ
Ɣ
button latches and remains in) to resume operation.
Ɣ The circuit breaker has tripped or
the supply circuit fuse has blown.
Ɣ
applicable. If the problem continues, contact a
licensed electrician.
Ɣ There has been a local power
failure.
Ɣ The unit will resume normal operation once power
has been restored.
Ɣ
the same circuit.
Ɣ The unit requires a dedicated outlet circuit, not
shared with other appliances.
Ɣ Ɣ
other air conditioner.
Ɣ The circuit breaker or time-delay
fuse is not of the proper rating.
Ɣ
for your unit. If the problem continues, contact a
licensed electrician.
Ɣ
button pops out) due to disturbances
on your power supply line.
Ɣ
button latches and remains in) to resume normal
operation.
Ɣ Electrical overload, overheating, or
Ɣ
resume normal operation.
from the product manufacturer and must not be repaired.
Ɣ
blocked.
Ɣ
are not blocked by curtains, blinds, furniture, etc.
Ɣ Windows or doors to the outside are
open.
Ɣ Ensure that all windows and doors are closed.
Ɣ The temperature is not set at a cool
Ɣ
warmer setting as necessary.
Ɣ Ɣ
remove obstruction.
Ɣ The indoor coil or outdoor coil is
dirty or obstructed.
Ɣ
remove obstruction.
Ɣ
(cooking, showers, etc.) in the room.
Ɣ
or bathing and, if possible, try not to use heat
producing appliances during the hottest part of the
day.
Ɣ The temperature of the room you
Ɣ
off a very hot room.
Troubleshooting Tips