Filter
Top Products
5
External Control Status
The
$MART
icon illuminates to indicate that the system is being controlled
remotely.
SET POINT
F
AUTO FAN
79
FRR125
$MART
The icon illuminates to indicate that the system is receiving a Wi-Fi
connection.
SET POINT
F
AUTO FAN
79
FRR126
1. Timer (factory default)
the start, stop and day window can be found latter in this manual.
2. Residential Schedule - When selected the unit follows a pre-
programmed set of operational parameters that covers 7 days of
the week with 4 time windows during each day. Each time window
1
SCHEDULE
FRR137
To change the
button for 3 sec.
If the Schedule function is available, the system displays the
icon +
SCHEDULE
icon. The display indicates the schedule function that is active.
To change to an alternate schedule (2 or 3), press the
or button.
If the Schedule function is not available, the Timer icon
shows without
the
SCHEDULE
icon.
If there is no button activity for 15 seconds, the function will time out and
display reverts to the normal display.
2
SCHEDULE
FRR138
or button, within 15 second of pressing the
SET POINT
F
AUTO FAN
79
FRR136
The display reverts to the normal display.
ADVANCED FUNCTIONS
Schedule, Error Mode, Test Mode, and Maintenance Menu). The functions
mentioned in the following section may or may not be available depending
on the air conditioner model.
Timer/Schedule Select
SET POINT
F
AUTO FAN
79
FRR136
3. Commercial Schedule - When selected the unit follows a pre-
programmed set of operational parameters that covers 7 days of
the week with 2 time windows during each day. Each time window