Friedrich SQ08 Air Conditioner User Manual


 
26
Cord Routing Change
Unplug unit.
YourKühlQunitwillcomewiththepowercordalreadyinstalledandrouted
totheleftside of theunit.
Forconvenience and optimumappearance the direction thatthe power cord
exitstheunitmaybechangedfromlefttorightbyfollowingtheprocedure
below.Selecttheexitlocationontheleftorrightbasedonproximityto
the power outlet.
STEP 1.
WARNING
Electrical Shock Hazard
Make sure your electrical receptacle has the
same configuration as your air conditioner’s
plug. If different, consult a Licensed Electrician.
Do not use plug adapters.
Do not use an extension cord.
Do not remove ground prong.
Always plug into a grounded 3 prong oulet.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Figure 18B
REMOVE ELECTRONIC CONTROL
POWER CABLE HARNESS
Figure 18A
Remove Decorative Front Cover. (See Figures 18A and 18B)
1
2
1
2
SCREWSATTACHING DECORACTIVE
FRONT COVER TO UNIT
(4 REQUIRED)
OPEN THE DECORATIVE FRONT COVER
LOCATE AND DISCONNECT ELECTRONIC CONTROL POWER CABLE HARNESS.
3
REMOVE 4 SCREWSATTACHING DECORATIVE
FRONT COVER. SAVE TO REINSTALL LATER.
3
4
REMOVE DECORATIVE FRONT COVER.
STORE IN A SAFE PLACE TO REINSTALL LATER.
(no image)