Friedrich SQ05 Air Conditioner User Manual


 
26
Cord Routing Change
Unplug unit.
Your Kühl Q unit will come with the power cord already installed and routed
to the left side of the unit.
For convenience and optimum appearance the direction that the power cord
exits the unit may be changed from left to right by following the procedure
below. Select the exit location on the left or right based on proximity to
the power outlet.
STEP 1.
WARNING
Electrical Shock Hazard
Make sure your electrical receptacle has the
same configuration as your air conditioner’s
plug. If different, consult a Licensed Electrician.
Do not use plug adapters.
Do not use an extension cord.
Do not remove ground prong.
Always plug into a grounded 3 prong oulet.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Figure 18B
REMOVE ELECTRONIC CONTROL
POWER CABLE HARNESS
Figure 18A
Remove Decorative Front Cover. (See Figures 18A and 18B)
1
2
1
2
SCREWS ATTACHING DECORACTIVE
FRONT COVER TO UNIT
(4 REQUIRED)
OPEN THE DECORATIVE FRONT COVER
LOCATE AND DISCONNECT ELECTRONIC CONTROL POWER CABLE HARNESS.
3
REMOVE 4 SCREWS ATTACHING DECORATIVE
FRONT COVER. SAVE TO REINSTALL LATER.
3
4
REMOVE DECORATIVE FRONT COVER.
STORE IN A SAFE PLACE TO REINSTALL LATER.
(no image)