Friedrich RC/RH 10 Air Conditioner User Manual


 
3
www.retroaire.com
The Right Fit For Comfort
INSTALLER RESPONSIBILITIES
This manual has been prepared to acquaint you with the
installation, operation and maintenance of RetroAire Dual
Motor PTACs and to provide important safety information
in these areas.
We urge you to read all of these instructions thoroughly
before attempting the installation or operation of your unit.
This manual should be kept for future reference.
The manufacturer of this unit will not be liable for any
damages caused by failure to comply with the installation
and operating instructions outlined in this manual.
A rating plate identifying your RetroAire Dual Motor
PTAC can be found on the unit. When referring to your
unit, always have the information listed on the rating plate
readily available.
TABLE OF CONTENTS
Warnings and Precautions .....................................2-3
The Dual Motor PTAC Family ................................... 4
Controls and Components ........................................ 4
Preparation for Installation ....................................... 5
Electrical Wiring ....................................................... 5
Installation Instruction for:
RC/RH10 Replacement PTAC ............................. 6
RC11 Replacement PTAC .................................... 7
RC12 Replacement PTAC ................................... 8
RC/RH20 Replacement PTAC ........................ 9-10
RC21 Replacement PTAC .............................11-12
RC/RH35 Replacement PTAC ............................13
RC/RH45 Replacement PTAC .......................14-15
RC/RH80 Replacement PTAC .......................16-17
RC/RH90 Replacement PTAC .......................18-19
Final Inspection and Start-Up ..............................20
Sequence of Operation .......................................20-23
Cleaning and Maintenance .....................................24
Troubleshooting .......................................................24
Specifications ...........................................................25
Warranty ..................................................................26
Do not use the RetroAire Dual Motor PTAC with
any electrical supply voltage other than the one
listed on the rating plate.
Tampering with the RetroAire Dual Motor PTAC is
dangerous and may result in serious injury or death.
Tampering voids all warranties. Do not attempt to
modify or change this unit in any way.
!
!
DANGER
Completely read all instructions prior to assembling,
installing, operating, or repairing this product. Inspect
all parts for damage prior to installation and start-up.
!
!
WARNING
PTAC Chasses are heavy. To avoid injury, use
assistance when lifting.
!
!
CAUTION
IMPORTANT SAFETY FEATURE
Power Cord With Integral Safety Protection
All PTACs rated 250
V or less that are cord connected
to the power supply are equipped with a power cord
with integral safety protection as standard. Providing
personal shock protection as well as arcing and
fire prevention, the device is designed to sense
any damage in the line cord and disconnect power
before a fire can occur. Tested in accordance with
Underwriters Laboratories, the cord set also offers a
unique “passive” operation, meaning the unit does not
require resetting if main power is interrupted.
WARNING - A DAMAGED POWER SUPPLY CORD
MUST BE REPLACED WITH A NEW CORD FROM
THE MANUFACTURER, AND NOT REPAIRED.
Each power cord should be checked before every
use. Follow the instructions in the order listed on the
device.
WARNING - DO NOT USE THE PRODUCT IF THE
UNIT FAILS THE TEST.
MODIFICATION AND TAMPERING
Note: Unit uses R22 refrigerant.
!
!
DANGER