Friedrich MW09C1H Air Conditioner User Manual


 
Function and Control
Pressing X-FAN button in COOL or DRY mode,the icon is displayed and the indoor
fan will continue operation for 10 minutes in order to dry the indoor unit even though you
X-FAN:
have turned off the unit.
After energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO,FAN or
HEAT mode.
10
11
TEMP:
9
8
TIMER ON:
7
Press TIMER ON button, "ON" blinks and disappears. Within 5 seconds, every press of + or -
button increases or decreases the ON time setting by 1 minutes. Holding down either buton
above 2.5 seconds rapidly changes the time setting by 1 minute and then by 10 minutes.
Within 5 seconds after setting, press TIMER ON to confirm. To cancel the TIMER ON
operation, press TIMER ON button.
TIMER OFF :
Press TIMER OFF button to set TIMER OFF. The setting method is the same as TIMER
ON.
Press CLOCK button, the icon blinks. During 5 seconds blinking, pressing + or - button adjusts
CLOCK :
preset time. Holding down either button above 2 seconds increases or decreases the time by
1 minute every 0.5 second. If you are still pressing the button after 10 minutes increased or
decreased, the time will be changed by 10 minutes every 0.5 second. During blinking, press
the CLOCK button again, the icon will be constantly displayed and it indicates that setting
has been finished.
Press TEMP button, (set temperature), (indoor ambient temperature) and
(outdoor ambient temperatur) is displayed circularly. Not displaying icon is defaulted.
During operation of TEMP button, the set temperature is always displayed.
Note: Outdoor ambient temperature is only displayed for some models.
24