Filter
Top Products
3
Parts supplied (on some models)
Check that all parts are included in parts package.
NOTE: Installation parts are supplied for double-hung windows
up to 40" (101.6 cm) wide. A special Wide Window Kit is available
from your dealer or service center. See “Accessories.”
A.Support brackets with
adjustment bolts (2)
B.Foam seals (2)
C.Window lock bracket (2)
D.#10 x
¹⁄₄
" pan-head Phillips
screws (6)
E.#10 x
³⁄₈
" washer-head
Phillips screws (4)
F. #10 x
¹⁄₂
" pan-head Phillips
screws (4)
G.#10 x
³⁄₄
" round-head screws (6)
H.#10 x
⁷⁄₈
" pan-head Phillips
screws (4)
I.Top channel
J.Side curtains (2)
B
C
D
H
G
E
F
A
I
J
A. Cabinet louvers
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fi re, electrical shock or injury when using your air conditioner, follow these basic precautions:
■ Plug into a grounded 3 prong outlet.
■ Do not remove plug ground prong.
■ Do not use a plug adapter.
■ Do not use an extension cord.
■ Unplug air conditioner before servicing.
■ Use two or more people to move and install air conditioner.
SAVE THESE INSTRUCTIONS
Installation Requirements
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
■ Flat-blade and Phillips
screwdrivers
■ Level
Through-the-wall installation
In addition to the tools listed above, the following tools and sup-
plies are needed for though-the-wall installation.
■ Saw
■ Wood preservative
■ Caulk
■ Tape measure
■ Drill and ³⁄
16
" or smaller bit
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
Check the location where air conditioner will be installed.
Proper installation is your responsibility. Make sure you have
everything necessary for correct installation.
The location should provide:
■ Grounded electrical outlet within 4 ft (122 cm) of where the
power cord exits the air conditioner.
NOTE: Do not use an extensioncord.
■ Free movement of air in room to be cooled.
■ A large enough opening for the air conditioner.
■ Adequate wall support for weight of air conditioner. Air con-
ditioner weighs between 145 and 200 lbs (66 to 91kg).
NOTE: Cabinet louvers must not be obstructed. Air must be
able to pass freely through the cabinet louvers (A).
■ 1" (2.5 cm) or thicker lumber
■ 7 - #10 x 1" wood screws
A