Filter
Top Products
Fluke 123
Users Manual
32
Saving and Recalling a Setup or a
Screen
You can save Screens and Setups to memory, and recall
them again from memory. Two Screen memories and ten
Setup memories are available. Save Screens when you
want to use the present screen image for future reference.
Save a Setup when you need the present operating
configuration more often for your measurements.
Note
Because the navigations for Setups and Screens
are identical, only saving and recalling Screens
are explained in this Section.
Saving Screens
To save a screen, do the following:
Open the SAVE&PRINT menu.
Observe that SCREENS SAVE is
already highlighted.
Note
From this point the screen is frozen until you
leave the SAVE&PRINT menu again.
ô Open the SAVE SCREEN
submenu.
Note that free memory locations are indicated by an open
square (p) before the memory number.
í Highlight SCREEN 2.
÷ Save the actual screen.
Recalling Screens
To recall a screen, do the following:
Open the SAVE&PRINT menu.
ô Highlight SCREENS RECALL.