Fluke 568 Thermostat User Manual


 
Infrared Thermometers
Menu Overview
9
Setup
From the Setup menu, the backlight, time and date, and display language can be changed.
Backlight
In normal use, the backlight is always on. Use this menu to change the backlight setting
from on to off. Turning the backlight off conserves battery power.
1. Press the Menu softkey until Setup appears as the left softkey function.
2. Press the Setup softkey.
3. Backlight has an indicator next to it. To enter the backlight menu, press the Enter
softkey.
4. Press the OFF softkey to turn the backlight off, press the ON softkey to turn it on.
5. Press the Back softkey to return to the Setup Menu.
Time/Date
To change the time on the thermometer:
1. Press the Menu softkey until Setup appears as the left softkey function.
2. Press the Setup softkey to enter the Setup menu.
3. Press the down arrow softkey to select Time/Date.
4. Press the Enter softkey.
5. Select the Time softkey.
6. Select the desired time format softkey (24hr or 12hr).
7. Use the up and down softkeys to change the selected hour to the desired hour.
8. Press the Next softkey to select the minutes.
9. Use the up and down softkeys to change the selection to the desired minute.
10. When in 12 hour mode, press the Next softkey to highlight the am/pm parameter.
11. Use the up and down softkey to change to am or pm.
12. Press the Done softkey when finished. The display reverts to the first page of the
Time/Date menu.
To change the date on the thermometer:
1. From the main menu, press the Menu softkey until Setup appears as the left softkey
function.
2. Press the Setup softkey.
3. Press the down arrow softkey to select Time/Date.
4. Press the Enter softkey.
5. Press the Date softkey.
6. Select the date format: Day/Month/Year (dmy) or Month/Day/Year (mdy).
7. Use the up and down softkeys to change the selected parameter.
8. Press the Next softkey and the arrow softkeys to select the month, date, or year
parameters.
9. Use the up and down softkeys to change the selected parameter.