Filter
Top Products
SECURITY CODES & AUTHORITY LEVELS
To Add a User
IMPORTANT: Temporary users should not be shown how to use any system function
they do not need to know (e.g. bypassing protection zones).
CODE
1.
Enter Master or Manager code and press the
q
key.
2.
Enter the new user’s 2-digit User Number (01-99).
3.
Enter 4-digit security code for that user. The following prompts will appear.
Enter 1 to add a new user code. Entering 0 will change the
existing user’s code to the code entered in step 3. See
Changing A User’s Code section.
Enter the authority level, l-6, for this user within this partition.
1 = master
3 = operator A
5 = operator C
2 = manager
4 = operator B
6 = duress code
This prompt will appear if a 5600 series button transmitter has
been supplied and has not yet been assigned to a user.
Press 1 if a button transmitter will be assigned to this user.
Othenrvise press 0.
If assigning a button transmitter, this prompt will appear. Enter
the button’s zone number (see your installer for zone
number).
If you have access to other partitions, the keypad will prompt
for ability of this new user to access (GOTO) those
partitions. Press 0 (NO) or 1 (YES). If no, the system
activates this user code and exits ‘Add a User” mode. If yes,
the keypad prompts for the Global Arm option for this user.
- 36 -