Filter
Top Products
Using the
The OFF key is used to disarm the system and to silence alarm and trouble sounds.
I
1 OFF Key
See ‘SUMMARY OF AUDIBLE NOTIFICATION” section for information which will help
you to distinguish between FIRE and BURGLARY alarm sounds.
IMPORTANT: If you return and the main burglary sounder is on, DO NOT enter the
premises, but call the police from a nearby safe location. If you return after an alarm has
occurred and the main sounder has shut itself off, the keypad will beep rapidly upon
entering, indicating that an alarm has occurred during your absence and an intruder may
still be on the premises. LEAVE IMMEDIATELY and CONTACT THE POLICE from a
nearbv safe location.
To disarm the system and silence burglary or fire alarms:
1. Enter your security code and press E.
p%L-l
The “Ready” message will be displayed (if no alarms have
occurred while armed) and the keypad will beep once to
confirm that the system is disarmed.
Memory of
The keypad displays the zone number and type of alarm for any zone that has an
Alarm
alarm condition. These messages will remain displayed until cleared by a user. If an
alarm has occurred, note the zone number displayed on the keypad and repeat step 1
above to clear the ‘Memory of Alarm” and restore the Ready message display. If the
Ready message will not display, go to the displayed zone and remedy the fault (close
windows, etc.). If the fault cannot be remedied, notify the alarm agency.
-
20
-