Filter
Top Products
For Suction Operation:
1a. Connect hose to suction inlet on dirt container by lining up arrow on hose with
metal pins on inlet and lock with a quarter turn to the right.
2a. Connect wand or cleaning attachment to hose by inserting male end into hose
and rotating it until the attachment or wand snaps into place.
3. Use accessories as recommended on the following pages.
For Blowing Operation:
1b. Remove the exhaust cap with a quarter turn to the left.
2b. Connect hose to inlet on top of unit by lining up arrow on hose with metal pins
on inlet and lock with a quarter turn to the right.
3. Connect wand or cleaning attachment to hose by inserting male end into hose
and rotating it until the attachment or wand snaps into place.
4. Use accessories as recommended on the following pages.
1a
2a
1b
2b
7
ENGLISH
Assembly and Operation