Filter
Top Products
Attaching Power Nozzle:
1. Assemble for suction cleaning.
2. Connect wand to nozzle by pushing the female end of the wand over the male
end of the swivel neck of the nozzle until the locking button of the wand snaps
into place. The wand swivels more than 90 degrees allowing it to lie flat on the
floor.
3. Plug cord extending from other end of hose into the outlet on the power unit.
PLEASE NOTE: The “ON/OFF” markings on the hose feature the international symbols of “I”
for ON and “O” for OFF. This switch only controls turning the Power Nozzle on or off. To turn the
Power Nozzle ON (for carpets) slide the switch to the most forward position. To turn the Power
Nozzle OFF(for wood, tile, and linoleum floors) slide the switch to the rear position.
NOTICE: This hose contains electrical wires.
Cleaning With The Power Nozzle:
The Majestic
®
Power Nozzle requires no rug surface height adjustment. The shape of
the Power Nozzle body has been specially designed to allow it to be effective on any rug
or bare floor surface.
Use long, slow strokes when cleaning. For thicker rugs, use a criss-cross pattern to raise
nap and give them a fluffier appearance.
To clean stairs:
●
Remove caster set from power unit.
●
Set Majestic
®
on landing.
●
Remove wand and connect hose handle directly to Power Nozzle.
STORAGE: Avoid sharp bends in hose by removing hose from the unit before storing.
CAUTION: Do not use on carpets or rugs with fringe or loose fibers.
1
2
3
8
ENGLISH
Power Nozzle