Filter
Top Products
Nozzle Head
Height Adjustment Lever
USING THE VACUUM CLEANER
HEIGHT ADJUSTMENT LEVER
The nozzle head can be
adjusted to four different
height settings.
Set the height adjustment to the
appropriate carpet length.
rd
Use the 3 ( )height
setting.
th
Use the 4 ( )heigh t
setting.
EDGE CLEANING
This vacuum cleaner is equipped with an "edge cleaning" function for cleaning carpet edges
near baseboards and stationary furniture.
7
1
2
RUG/FLOOR (TOOLS)SELECTOR
The RUG/FLOOR(TOOLS)selector should only be
adjusted while the vacuum cleaner is turned on
and in the upright position.
When cleaning a rug or carpet,first turn the
ON/OFF switch to the ON position,and then
set the RUG/FLOOR(TOOLS)selector to the
RUG position.
When cleaning a bare floor or when using
one of the attachments, set the RUG/FLOOR
(TOOLS)selector to the FLOOR position.
Caution: Do not change the setting of the RUG/FLOOR(TOOLS)selector while the vacuum
cleaner is turned off.
RUG/FLOOR(TOOLS)selector
RUG Position FLOOR Position
Before using the height adj-
ustment lever,please make
sure the nozzle head is tilted
backward from the floor.
Cautio n: