Filter
Top Products
2
4
1
3
1
2
3
REPLACEMENT INSTRUCTIONS
REMOVING THE BOTTOM PLATE
Set the vacuum cleaner to the
parallel position and turn it over.
Slide the latch in the direction
of the arrow.
Remove the bottom plate by pulling
the tabs as illustrated.
REATTACHING THE BOTTOM PLATE
Insert the projection on the bottom plate
into the groove on the nozzle head
and set the bottom plate in place.
Push the bottom plate as shown.
Slide the latch in the direction shown.
14
Turn the vacuum over and place in the
upright position.
Latch
Pull here
Bottom Plate
Bottom Plate
Projection
Groove
Press
Press
Latch
Nozzle Head
Height Adjustment Lever