Filter
Top Products
Handle Release
6
USING THE VACUUM CLEANER
ON/OFF SWITCH
Start or stop vacuum cleaner
by pushing on the switch.
ADJUSTING THE HANDLE
The handle of this vacuum cleaner can be set to one of
three positions-Upright,Normal,Parallel.Place your foot
on either one of the handle release points as shown and pull
back on the handle until it releases from its upright position.
Upright position
The handle is normally locked in this
position for storage or when using the
attachments.
Push the handle forward
until it locks.
Normal position
This position is used for normal cleaning.
Parallel position
This position is used for cleaning under
furniture.
ON/OFF Switch
EDGE CLEANING
This vacuum cleaner is equipped with an "edge cleaning" function for cleaning carpet edges
near baseboards and stationary furniture.
OFF ON