Filter
Top Products
PRECAUTIONARY MEASURES
2. Do not blow air directly into the air
purifier.
7. Place the air purifier in a well
ventilated location of the room.
Important
3. Keep sides of the unit more than
4 inches away from walls.
8. Placing the air purifier close to the
source of the air pollution can
improve the overall air quality of the
room more quickly.
4. When pulling out the power plug
from the wall outlet, pull the plug
not the power cord.
: If the unit is not properly placed in a room it can interfere with
performance of the unit or other appliances in the home. Follow these placement safe
guards for optimum performance.
6. Do not place the unit where the air
intake or outlet grill could be
obstructed by curtains or drapery.
Curtains, doors, or furniture could
interfere with the radio signals from
the remote control.
1. The unit must be placed at least 6
feet away from a TV set, radio or
cordless phone.
9. If there are lamps with remote control
operation, the remote control for the
air purifier may not function properly.
5. Avoid direct sunlight on the unit. This
could interfere with the signals from
the remote control operation.
2
FOR TECHNICAL SUPPORT
for Model AP500H
TO ORDER REPLACEMENT FILTERS AND BULBS
for Model AP500H
Filter Replacement Item # XAP500H
Bulb Replacement Item # 102AMI
Call: 1 (800) 275-9251
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
Call: 1 (800) 275-9251
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
Please Note:
The pre-filter is washable. It should however be replaced every six (6)
months to ensure peak performance of your air purifier.
The HEPA filter should be replaced every six (6) to nine (9) months of
usage depending on household environments. Some discoloration of the
HEPA filter material may occur, this is normal and will not affect the filter's
performance.
It is important that when you wash the pre-filter, you allow it to air dry
COMPLETELY before using again. We recommend 24 hours to air dry.
DO NOT DRY FILTER IN DRYER.
Important:
Make sure that THE PRE-FILTER is completely dry before inserting back
onto the HEPA filter.
11