Filter
Top Products
2
TOLL FREE: 1-800-798-7398
3
English
www.sharkclean.com
IMPORTANT: First things first, always
make sure the mop is UNPLUGGED
from the wall when not in use.
Never fill the mop, attach the mop
head, change or remove the micro-
fiber cleaning pad when the mop is
plugged into the wall. To prolong
the life of your Shark
®
Pro Steam
Pocket
®
Mop, we recommend using
distilled water. Make sure you only
add water to the tank. Chemicals or
cleaning solution may damage the
appliance and could be unsafe for
you and your family.
Getting Started
ASSEMBLE
1 Insert the Mop handle end labeled
“Front” into the steam mop body.
Make sure it is inserted past the
line printed on the pole. Secure the
assembled handle and pole by using
the large screw and a Phillips or a flat
head screwdriver (screwdriver not
included). (fig. 1)
fig. 1
When assembling your steam mop there
may be a little water in or around the
water tank. This is because we test all
our steam mops 100% before you buy
them, so you get a quality Shark
®
Pro
Steam Pocket
®
Mop.
h Quick Release Swivel Cord Wrap
i Cord Clips
j Water Tank Cap
k Water Tank
l ON/Standby Switch
m Mop Head Release Button
*Phillips or flat head screwdriver can be
used. Screwdriver not included.
k
l
j
a All-Purpose Mop Head (1),
XL Mop Head (1) and
Triangle Mop Head (1)
b Steam Mop Body
c Mop Handle
d Two-Sided Micro-Fiber Cleaning Pads
for the All-Purpose Mop Head (2),
XL Mop Head (1)
and Triangle Mop Head (1)
e (1) 6mm x 54mm Large Screw*
f Filling Flask
g Carpet Glider
c
a
e
d
g
b
f
m
h
i
S3601CO_IB_110117.indd 2-3 1/17/11 4:28 PM