Filter
Top Products
Removing the Dust Cup Filter
Instructions for Use
1. Push the Power On/Off switch to disconnect the power.
2. Remove the flexible hose (see page 4).
Dust Cup Handle
NOTE: Before using the appliance, unwind a sufficient length of cable and
Insert the plug into the wall socket. A yellow mark on the power
cord shows the ideal cable length. Don’t pull the power cord
beyond the red mark.
3. Remove the dust cup by lifting the dust cup
handle.
3. To rewind the power cord, press the
cable rewind button with one hand and
guide the power cord with the other
hand to ensure that it does not whip
causing damage.
1. Insert the power plug into the wall outlet.
2. Press the Power On/Off Switch to
activate the vacuum cleaner.
4. Take the dust cup filter out of the dust
cup, do not let the dust fall out.
5. Take out the dust cup and dispose of the dust
inside.
Caution:
If the dust is tightly packed and difficult to
remove, lightly tap the front cover.
6. Insert the dust cup filter into the dust cup.
7. Attach the dust cup to the vacuum by pressing
together until it is locked.
8. Reassemble the unit.
CHANGING & CLEANING THE DUST CUP FILTER
To achieve the best performance, empty the dust cup and clean the
dust cup filter after each use.
1. To remove the dust cup (container), lift the dust cup handle and pull
out the dust cup (container ).
2. Pull out the dust cup filter.
3. Shake the dust from the dust cup filter into a garbage can to remove
the dust that is accumulated on the dust cup filter surface..
4. Rinse the dust cup filter in cold water, and then wait until it dries
completely before replacing it into the dust cup (container).
5. Place the dust cup filter carefully into the dust cup (container).
6. Replace the dust cup (container) back into the unit.
6
7